PETG Filaments

In addition to pure (homopolymer) PET, PET modified by copolymerization is also available.

In some cases, the modified properties of copolymer are more desirable for a particular application. For example, cyclohexane dimethanol (CHDM) can be added to the polymer backbone in place of ethylene glycol. Since this building block is much larger (6 additional carbon atoms) than the ethylene glycol unit it replaces, it does not fit in with the neighboring chains the way an ethylene glycol unit would. This interferes with crystallization and lowers the polymer's melting temperature. In general, such PET is known as PETG or PET-G (Polyethylene terephthalate glycol-modified). PETG is a clear amorphous thermoplastic that can be injection molded or sheet extruded. It can be colored during processing.

PrimaSelect PETG - 1.75mm - 750 g
PrimaSELECT™PETG is a new and extremely tough material, it has very high impact strength, good flexibility and practically no shrinkage. PrimaSELECT™PETG is a hydrophobic (does not absorb water) filament with a high gloss. Prima Filaments offers two versions of PETG.
29,90 €
 
incl. 19% tax excl. Shipping costs
PrimaSelect PETG - 2.85mm - 750 g
PrimaSELECT™PETG is a new and extremely tough material, it has very high impact strength, good flexibility and practically no shrinkage. PrimaSELECT™PETG is a hydrophobic (does not absorb water) filament with a high gloss. Prima Filaments offers two versions of PETG.
29,90 €
 
incl. 19% tax excl. Shipping costs
PETG PrimaSelect - 2.85mm - 2.3 kg
PrimaSELECT™PETG is a new and extremely tough material, it has very high impact strength, good flexibility and practically no shrinkage. PrimaSELECT™PETG is a hydrophobic (does not absorb water) filament with a high gloss. Prima Filaments offers two versions of PETG
59,90 €
 
incl. 19% tax excl. Shipping costs
PETG PrimaSelect - 1.75mm - 2,3 kg
PrimaSELECT™PETG is a new and extremely tough material, it has very high impact strength, good flexibility and practically no shrinkage. PrimaSELECT™PETG is a hydrophobic (does not absorb water) filament with a high gloss
59,90 €
 
incl. 19% tax excl. Shipping costs
PETG - spool of 1KG - 3mm - eSun
1kg of PETG filament
PETG filament is a close cousin to PET (Polyethylene terephthalate) filament. PETG is a new updated version that has enhanced properties.
28,90 €
 
incl. 19% tax excl. Shipping costs
PETG - spool of 1KG - 1.75mm - eSun
1kg of PETG filament
PETG filament is a close cousin to PET (Polyethylene terephthalate) filament. PETG is a new updated version that has enhanced properties.
28,90 €
 
incl. 19% tax excl. Shipping costs
Filament PETG 1.75 mm / 0.5 kg Real
PETG filament 1.75 mm 500 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience.
16,90 €
 
incl. 19% tax excl. Shipping costs
Filament PETG 1.75 mm / 1 kg Real
PETG filament 1.75 mm 1000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience.
29,90 €
 
incl. 19% tax excl. Shipping costs
Filament PETG 2.85 mm / 1 kg Real
PETG filament 2.85 mm 1000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience.
29,90 €
 
incl. 19% tax excl. Shipping costs
Filament PETG 1.75 mm / 3 kg Real
PETG filament 1.75 mm 3000 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience.
69,90 €
 
incl. 19% tax excl. Shipping costs
PETG Filament - 2.85 mm / 0.5 kg Real
PETG filament 2.85 mm 500 g for 3D printers is of superior quality, produced in The Netherlands. Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience.
16,90 €
 
incl. 19% tax excl. Shipping costs
EasyPrint PETG - 1.75mm - 3 kg
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
69,90 €
 
incl. 19% tax excl. Shipping costs
Selenis Genius 80 M PETG pellets ( 1 kg )
PETG filament is a close cousin to PET (Polyethylene terephthalate) filament. PETG is a new updated version that has enhanced properties. The optimum print temperature is between 215°C - 235°C. Please note that different printers print at slightly different temperatures. PETG filament has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and others. A heated bed is not required.
8,50 €
 
incl. 19% tax excl. Shipping costs
Nexeo3D Amphora? AM3300 (PET-G) - 2.85mm - 500 g
Amphora™ AM3300 3D polymer is a transparent, low-odor and styrene-free material which enables printing within a wide range of processing temperatures.
 
39,90 €
 
incl. 19% tax excl. Shipping costs
Nexeo3D Amphora? HT5300 (PET-G) - 1.75mm - 500 g
Eastman Amphora™ HT5300 3D polymer is a transparent low-odor, BPA and styrene-free material exhibiting superior durability, dimensional stability and toughness. 
49,90 €
 
incl. 19% tax excl. Shipping costs
Nexeo3D Amphora? HT5300 (PET-G) - 2.85mm - 500 g
Eastman Amphora™ HT5300 3D polymer is a transparent low-odor, BPA and styrene-free material exhibiting superior durability, dimensional stability and toughness. 
49,90 €
 
incl. 19% tax excl. Shipping costs
Raise3D R3D PETG Filament 1,0kg 1,75mm
PETG is the most commonly used form of PET (polyethylene terephthalate), with the G version being a glycol-modified PET which is a widely used engineering thermoplastic. PETG has strong, durable properties and good heat resistance like ABS, but it is easier to print. PETG printed parts are used not only at the prototyping stage of product development, but also at later stages of functional testing and part assembly. Printed PETG parts have been successfully used in manufacturing applications with or without post-processing.
35,68 €
 
incl. 19% tax excl. Shipping costs
3D pen filament PETG (10 m / 1.75 mm) - Blue
High-quality 3D pen filament (10 m), from Real filaments. This Blue PETG works with 1.75 mm 3D pens.
3,51 €
 
incl. 19% tax excl. Shipping costs
EasyPrint PETG - 2.85mm - 3 kg
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
69,90 €
 
incl. 19% tax excl. Shipping costs
EasyPrint PETG - 2.85mm - 1 kg
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
29,90 €
 
incl. 19% tax excl. Shipping costs
EasyPrint PETG - 1.75mm - 1 kg
EasyPrint PETG is an extremely tough material. It has very high impact strength, good flexibility and practically no shrinkage. We offer two versions of PETG, Transparent and solid. With the transparent you will have a high gloss and almost completely transparent print depending on your wall thickness. The solid colors offer a vivid and beautiful surface with a high gloss finish. EasyPrint PETG is a glycol modified PET which means that it has even higher clarity, stiffness and toughness than regular PET.
29,90 €
 
incl. 19% tax excl. Shipping costs
ZMorph - PET-G Filament 1.75
Mixing glycol with PET makes this filament more practical and useful. It prevents corrosion and crystallization effects that can make regular PET more fragile. Rigid ZMorph PET-G is resistant to temperatures and liquids.
41,82 €
 
incl. 19% tax excl. Shipping costs
Kodak PETG 3D-Filament 1,75mm 750g
An easy to use material that has many benefits. It is stronger and more temperature resistant than PLA. Compared with ABS it is just as strong ABS but can be printed with much less warping, as well as having the benefit of being odourless.
32,11 €
 
incl. 19% tax excl. Shipping costs
Kodak PETG 3D-Filament 2,85mm 750g
An easy to use material that has many benefits. It is stronger and more temperature resistant than PLA. Compared with ABS it is just as strong ABS but can be printed with much less warping, as well as having the benefit of being odourless.
32,11 €
 
incl. 19% tax excl. Shipping costs
Show 1 to 24 (from a total of 29 products)
Execution time (seconds): ~0.743761