Special Filaments

eMORPH - Neutral - spool of 0.5Kg - 1.75mm

PrimaSELECT™Flex are available in diameter sizes of 1.75 mm and 2.85 mm.

PrimaSELECT™Flex is a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need a strong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid but still pliable.

PrimaSELECT™HIPS (High Impact Polystyrene) is a filament usually associated with ABS in the role of support material as it dissolves in limonene. HIPS is a very good filament on its own and you can make stunning prints with a beautiful matt surface finish.

PrimaSelect HIPS - 2.85mm - 750 g
PrimaSELECT™HIPS (High Impact Polystyrene) is a filament usually associated with ABS in the role of support material as it dissolves in limonene. HIPS is a very good filament on its own and you can make stunning prints with a beautiful matt surface finish.

PrimaSELECT™Flex is a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need a strong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid but still pliable.

PrimaSELECT™Flex is a new type of Thermoplastic Co-Polyester (TPC) with very rubber - like characteristics. This material is perfect when you need a strong, but still flexible filament. Our filament has a shore hardness of 45, which means that it´s rigid but still pliable.

PrimaSelect ABS+ Sample - 1.75mm - 50 g - Black

PrimaSelect ABS+ Sample - 2.85mm - 50 g - Black

PrimaSELECT™PETG is a new and extremely tough material, it has very high impact strength, good flexibility and practically no shrinkage. PrimaSELECT™PETG is a hydrophobic (does not absorb water) filament with a high gloss. Prima Filaments offers two versions of PETG.

eAL-fill - Aluminum - spool of 1Kg - 1.75mm

PrimaSELECT™ PLA is a very nice 3D Print material, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from PrimaFilaments comes on a transparent spool which makes it easy to see how much filament there are left on the spool.

PrimaSELECT™ PLA is a very nice 3D Print material, it´s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it's easy to get great prints. Filament from PrimaFilaments comes on a transparent spool which makes it easy to see how much filament there are left on the spool.

PrimaSELECT™PVA+ (polyvinyl alcohol) is a water soluble material that´s most often used as a support material.

Sample Pack of the most common 3D-Print material in the PrimaSelect™ range.

PrimaSELECT™WOOD is an outstanding and beautiful material - it smells like wood, looks like wood and feels like wood so surely it´s wood right? The answer is - almost. PrimaSELECT™WOOD is based on our PrimaSELECT™PLA formula and has all of the benefits that PrimaSELECT™PLA has but ina the formula we have added 35-40 \\\% wood and that is what gives PrimaSELECT™WOOD its unique properties.

Glue nylon pieces into larger builds with high bond strength. A modified cyanoacrylate adhesive increases “uptake” to the nylon surface and present a secure bond without needing to sand the surface. 
 

Taulman n-vent is a great middle ground if you are looking for something between PLA and ABS. Made from the Eastman Amphora 3D polymer, n-vent has a low-odor and styrene-free formulation! Not only that, n-vent guarantees zero warping, making it perfect for mechanical printing.

Nylon 230 is the fist nylon ever developed to be printed at 230C or a lower temperature than any other 3D Printing Nylon. With the release of Nylon 230, taulman3D will provide owners of PLA only or PLA and ABS only 3D Printers to add high strength Nylon to their list of material choices

Nylon 230 is the first nylon ever developed to be printed at 230C or a lower temperature than any other 3D Printing Nylon. With the release of Nylon 230, taulman3D will provide owners of PLA only or PLA and ABS only 3D Printers to add high strength Nylon to their list of material choices

Nylon 680, an innovative new nylon-based material for Fused Filament Fabrication (FFF) 3D printing, is designed for use in a wide range of industries, including: medical, dental, food processing, and robotics.

Nylon 680, an innovative new nylon-based material for Fused Filament Fabrication (FFF) 3D printing, is designed for use in a wide range of industries, including: medical, dental, food processing, and robotics.